Wood Stove Cost by Type Guide
The type layer prints apart by frame: Frame B prices three stove types as unit lines, from non-catalytic at $400 to $3,000, while Frame A prints installed totals and no type split.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The stove-type layer, priced apart
| Frame | Line, as published | 2026 band |
|---|---|---|
| Frame B | catalytic stove, unit line | $2,000-$5,000 |
| Frame B | non-catalytic stove, unit line | $400-$3,000 |
| Frame A | wood stove installation, on average, all types | $3,000-$8,000 |
| Frame A | by-type split | no line printed |
Every figure here is a published line inside its own frame and its own layer, never folded into the other. Stove type is the first attribute Frame B names; Frame A prints no type split at all. The project whole prices on the wood stove hub; the setup layer on the setup guide.
Frame B by-type unit lines, as reported
| Type line, as published | Frame | 2026 band |
|---|---|---|
| Catalytic stove | Frame B | $2,000-$5,000 |
| Non-catalytic stove | Frame B | $400-$3,000 |
| Hybrid stove | Frame B | $2,000-$4,500 |
Frame B's by-type table is a unit table: each stove type prints with its own band as a unit line, apart from every installed total on this page. The catalytic and hybrid lines share a $2,000 floor; the non-catalytic line prints the lowest floor of the three, at $400, and the widest spread.
Frame B installation and labor lines, as reported
| Line, as published | Reading | 2026 band |
|---|---|---|
| Wood-burning stove installation, in Angi data | per project | $1,500-$4,000 |
| National average, in the same data | per project | $3,000 |
| Labor, in the same data | per project | $500-$3,000 |
The unit lines price against Frame B's own project lines: an installation band of $1,500 to $4,000 counted more narrowly than Frame A's full-project reading, a national average of $3,000 inside it, and a labor band printed apart from every unit line and every total. A unit line and an installation line are two readings, never one price.
Frame A reading for the type buyer, as reported
| Frame A line, as published | Reading | 2026 band |
|---|---|---|
| Wood stove installation, in HomeGuide wood-stove data | on average | $3,000-$8,000 |
| National average, in the same data | per project | $5,500 |
| Minimum, in the same data | per project | $2,500 |
| Maximum, in the same data | per project | $12,000+ |
Frame A answers the type question with installed totals, not unit lines: an average band, a national average, a minimum, and an open-ended maximum, each printed for the project as a whole. No catalytic, non-catalytic, or hybrid line prints in Frame A, and none is derived from its totals here. The two readings sit side by side on the hub, each named with its own frame, and neither reading is restated on this page as the other frame's price for any stove type.
Reading a type quote, by frame
A type line answers the stove question; a setup line answers the starting-point question inside the same frames. A quote that names only one of the two readings is read against the table it belongs to, and against no other.
- Unit lines read apart from installed totals
- Labor lines read apart from every unit line
- Each frame's type reading read on its own frame only
Frequently asked questions
How much does a catalytic wood stove cost, as published?
Frame B prints the catalytic unit line at $2,000 to $5,000. Frame A prints no by-type split; its installed reading for the project as a whole is $3,000 to $8,000 on average, national average $5,500.
What do non-catalytic and hybrid stoves cost, as reported?
Frame B prints non-catalytic at $400 to $3,000 and hybrid at $2,000 to $4,500, each as a unit line. The non-catalytic line prints the lowest floor of the three types and the widest spread.
What labor line does either frame print, as reported?
Frame B prints labor at $500 to $3,000, apart from its unit lines and its installation band of $1,500 to $4,000. Frame A prints no separate labor line in the lines carried here; its bands are installed totals.
Does Frame A split its price by stove type, as reported?
No. Frame A prints installed totals only: $3,000 to $8,000 on average, national average $5,500, minimum $2,500, and maximum $12,000 or more, with no catalytic, non-catalytic, or hybrid line. The type split is Frame B's reading only.
Where do replacement and existing-chimney prices sit in the type layer?
Nowhere on this page: replacement, existing-chimney, no-chimney, and basement lines by setup are the setup layer, priced on the wood stove cost by setup guide. This guide prices stove-type lines only.