Washing Machine Motor Repair Cost Guide
The motor job, priced apart by frame.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by firm and scope
The motor job, priced apart
| Motor job row | Reading | Frame note |
|---|---|---|
| Motor, Frame A | $250-$700 | Frame A part row |
| Motor repair average, Frame A FAQ | about $400 | Frame A FAQ line |
| Complex motor work, Frame A | $200-$700 | Frame A span line |
| Carbon brushes, Frame B | $100-$200 | Frame B part row |
| Transmission, Frame B | $200-$600 | part alone $100-$300 |
| Clutch, Frame B | $200-$300 | part alone $15-$70 |
| Labor, Frame A | $50-$150 per hour | minimum service fee $75-$100 |
| Labor, Frame B | $50-$125 per hour | minimum service fees $70-$130 |
Frame B prints no single motor row; its motor-adjacent rows stand apart below.
Part lines behind the motor job: Frame A
| Part row, Frame A | Reading | Frame A note |
|---|---|---|
| Average band | $180-$250 | typical project $220 |
| Pump | $150-$400 | part row |
| Belt | $100-$200 | part row |
| Control board | $200-$500 | part row |
| Door seal or gasket | $120-$500 | part row |
| Motor | $250-$700 | part row |
| Water inlet valve | $120-$250 | part row |
| Other common repairs | $75-$200 | hoses, agitator, lid switch |
Frame A detail lines: labor $50-$150 per hour, minimum service fee $75-$100, diagnostic fees $50-$100; simple belt or hose work at $100-$200 against complex motor and control board work at $200-$700. Its FAQ line stands apart from its headline line: repair at about $180 on average, most paying $125-$450, a motor repair averaging about $400, timer or belt issues at about $140, new washers at $800-$3,000.
Part lines behind the motor job: Frame B
| Part row, Frame B | Reading | Frame B note |
|---|---|---|
| Repair band | $100-$400 | average band |
| National average | $200 | minimum $70, maximum $900 |
| Bearings | $100-$250 | part row |
| Outer-tub assembly and bearings | $600-$800+ | part row |
| Pump | $150-$350 | part alone $20-$100 |
| Transmission | $200-$600 | part alone $100-$300 |
| Lid switch or door lock | $100-$300 | latch part alone $20-$130 |
| Belt | $100-$200 | part alone $5-$30 |
| Valve | $100-$300 | part alone $20-$100 |
| Control board | $350-$550 | part alone $100-$300 |
| Clutch | $200-$300 | part alone $15-$70 |
| Rubber seal | $275-$600 | part row |
| Shock absorbers | $100-$350 | part row |
| Drum | $350-$800 | part alone $100-$600 |
| Spider arm | $350-$900 | parts alone $100-$350 |
| Carbon brushes | $100-$200 | part row |
| Timer | $150-$300 | part row |
Frame B detail lines: labor $50-$125 per hour, minimum service fees $70-$130. Frame B names brand, generic against OEM parts, assembly against part-only buying, travel distance, and accessibility as cost factors, and prints a new washing machine at $700-$1,300 for the unit only. The frames price the same job far apart -- a control board at $200-$500 in Frame A against $350-$550 in Frame B, a door seal at $120-$500 against a rubber seal at $275-$600, and a motor at $250-$700 in Frame A against no single motor row in Frame B, whose ceiling stands at a $900 maximum -- a frame difference, never averaged, never blended.
The neighbours named apart
Named apart, never a row here: the refrigerator repair, freezer repair, and oven repair clusters, each a different machine; and the standing washer-dryer repair cost guide, the pair companion, never rebuilt -- this cluster prices washing machine repair, the washer visit alone, never the pair.
The local read
The local read: the frames above are national published frames; a written quote for one address and one part line is the only local figure.
Reading a quote
- Motor row named
Frequently asked questions
What does washing machine motor repair print at, as reported?
Frame A prints the motor at $250 to $700, its FAQ line a motor repair averaging about $400. Frame B prints no single motor row. A frame difference, never averaged.
What do the motor-adjacent rows print at in Frame B, as reported?
Frame B prints carbon brushes at $100 to $200, the transmission at $200 to $600 (part alone $100 to $300), and the clutch at $200 to $300 (part alone $15 to $70), each row apart.
What does the complex-work span print at, as reported?
Frame A prints complex motor and control board work at $200 to $700 against simple belt or hose work at $100 to $200 -- two spans, printed apart.
What do labor lines print at on the motor job, as reported?
Frame A prints labor at $50 to $150 per hour with a minimum service fee at $75 to $100. Frame B prints labor at $50 to $125 per hour with minimum service fees at $70 to $130.
Is the combined pair read priced on this guide?
No. The pair read stands on the standing washer-dryer repair cost guide, the pair companion named apart and never rebuilt here. Refrigerator, freezer, and oven repair stand in their own clusters. This guide prices the motor job alone.