Paver Patio Cost by Size Guide

Patio sizes priced apart: 10x10, 10x20, 14x20, and 20x20 totals each stand in their own frame, crossed with concrete, brick or clay, and natural stone material lines.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data for Orange County — not a quote. Two published frames, Frame A (the Angi by-size-and-material frame) and Frame B (the HomeGuide installed-average frame), are named apart and never blended: Frame A counts the finished patio by size and material, Frame B counts the installed square foot split into material and labor lines. Always get 3 written quotes.

The sizes, priced apart by frame

Patio size, as listedFrame A readingFrame B reading
10x10 (100 square feet)$800-$2,500, finished patiocounted off the installed square foot, $10-$17
10x20 (200 square feet)$1,600-$5,000, finished patiocounted off the installed square foot, $10-$17
14x20 (280 square feet)no printed total in this frame; read off the per-square-foot rowscounted off the installed square foot, $10-$17
20x20 (400 square feet)$3,200-$10,000, finished patio$4,000-$6,800, counted installed in this frame

Each reading is one frame's own counting for that patio size, and the job on every row stays a ground-level unit-paver patio installation.

Material lines crossed with size, as listed by frame

Paver material, as listedFrame A readingFrame B reading
Concrete pavers$8-$15 per square footcounted inside the installed average
Brick or clay pavers$10-$20 per square footcounted inside the installed average
Natural stone pavers$15-$50 per square foothigh-end work at $25-$40 per square foot
All materials, overall$8-$25 per square foot$10-$17 per square foot on average

Material crosses the size rows as a per-square-foot reading inside each frame. No Frame B line is added into a Frame A size total on this page.

Frame lines behind the sizes, as reported

Frame line, as publishedFrame2026 band
10x10 patio, finishedFrame A$800-$2,500
20x20 patio, finishedFrame A$3,200-$10,000
Installed, overallFrame A$8-$25 per square foot
Average patio, installedFrame B$10-$17 per square foot
20x20 patio, installedFrame B$4,000-$6,800

The by-size rows price out of the frame lines above: each Frame A total is a finished-patio reading for its size alone. The Frame B installed average stands as its own counting.

Sizes priced apart, neighbours named apart

A size line answers the size question only inside its own frame, crossed with the material named beside it. Named apart, never a row here: paver driveways, poured and stamped concrete patios, paver sealing and re-sanding, deck construction, and whole-backyard landscaping budgets — and the job priced here stays a paver patio installation on every row.

Reading a by-size quote, by frame

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data and industry sources. Your price will vary with patio size and paver material. This guide does not endorse, rate, or recommend any firm or contractor. Figures are informational ranges only, not quotes.

Frequently asked questions

What does each patio size cost, as reported?

Frame A prints a total per size: a 10x10 patio at $800 to $2,500, a 10x20 at $1,600 to $5,000, and a 20x20 at $3,200 to $10,000. The 14x20 size prints no total in Frame A and reads off its per-square-foot bands. Frame B counts every size off an installed average of $10 to $17 per square foot and prints $4,000 to $6,800 at 20x20.

What does a 20x20 paver patio print at in the by-size guide, as reported?

Two readings, one per frame. Frame A prints a finished 20x20 at $3,200 to $10,000, counted by size and material. Frame B prints a 20x20 counted installed at $4,000 to $6,800. The two totals count differently and are never blended.

What do the material lines print at, as listed?

In Frame A, per square foot: concrete pavers at $8 to $15, brick or clay at $10 to $20, and natural stone at $15 to $50, inside an overall band of $8 to $25. In Frame B, materials sit inside the installed average, with high-end work at $25 to $40 per square foot.

Is the 14x20 size priced as a printed total in this guide?

No. Frame A prints totals for the 10x10, 10x20, and 20x20 sizes and per-square-foot bands for every size; the 14x20 row reads off those bands. Frame B counts the 14x20 off the same installed average as every other size.

Are paver driveways, concrete patios, sealing, decks, or whole-backyard jobs priced in this guide?

No, head-on: this guide prices paver patio installation sizes alone, by size crossed with paver material. Paver driveways, poured and stamped concrete patios, paver sealing and re-sanding, deck construction, and whole-backyard landscaping budgets are named apart.

Related guides