Kitchen Faucet Installation Cost in Orange County: 2026 Numbers
A kitchen faucet quote is priced line by line: the unit itself, the fitting labour, and the type lane the unit sits in -- pull-down, pull-out, single-handle, two-handle and bridge, or touchless and smart. Published 2026 figures put the full install total at $91 to $600 with an average of about $262, and most of the spread inside that span is faucet type and finish, not the hour or two of labour under the sink.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
Faucet-type lanes: what each type band prices at
| Faucet type | Published 2026 unit band | Priced as |
|---|---|---|
| Single-handle | $150-$350 | one handle, one mounting line |
| Pull-down | $175-$500 | spray head on a hose line |
| Pull-out | $175-$500 | wand format, compact sinks |
| Two-handle and bridge | $400-$700 bridge band | paired handles on a shared bar |
| Touchless | $400-$700 | sensor format, priced above manual types |
| Smart units, summary band | $300-$400 | connected format in Angi summary reporting |
Across all types, published unit reporting spans $70 to $900, with unit prices averaging $100 to $350 in HomeGuide figures. Finish moves the band inside each type: the same pull-down format prices apart in chrome and in a brushed or brass finish. The scope question behind the unit -- a same-hole swap against new work -- is compared line by line on the replacement vs. new installation cost guide.
The like-for-like replacement scope
| Scope line | Published 2026 range |
|---|---|
| Install total, all projects | $91-$600 |
| Average install total | about $262 |
| Professional installation band | $162-$364 |
| Installation incl. removal, HomeGuide | $120-$300 |
| Kitchen replacement labour only | $120-$250 |
| Labour rate | $45-$150 per hour |
The like-for-like scope is the priced centre of this lane: the new unit takes the holes and the supply connections the sink already has, the old unit comes out inside the same visit, and the labour line is reported at one to two hours. Quotes widen when the scope widens -- a different hole count, a paired sink project, or a new location -- and each wider scope prices apart on the comparison guide linked above.
The cost lines inside every quote
| Cost line | Typical 2026 range |
|---|---|
| Unit, all types | $70-$900 |
| Unit, average band | $100-$350 |
| Fitting labour | $45-$150 per hour |
| Old-unit removal | inside the $120-$300 installed band |
| Add-on layer | priced line by line; see the add-ons guide |
The unit is the largest line on most quotes, and the line shoppers compare first. The conditional lines sit behind it: supply lines and shut-off valves, a soap dispenser, a filtration unit or an instant hot-water dispenser, sprayer and hose lines, deck plates, disposal of the old unit, and cabinet-floor repair where an old fitting has marked the cabinet. That layer is priced in detail on the valves and filtration add-ons cost guide.
The Orange County framing: the kitchen-remodel wedge
Much local faucet work attaches to a kitchen already being priced for other work: a remodel with the counters open, or a finished kitchen where only the faucet is new. Priced as a standalone project, the quote carries the visit and fitting lines on their own. Priced inside a remodel already under way, the same unit shares the trade visit and the counter scope. That timing split explains much of the gap between a like-for-like swap quote in a finished kitchen and a faucet line inside a full remodel quote.
The lane boundary: one sink fixture, not a room or a stove fixture
This cluster prices one lane: the sink faucet and the work of fitting it. That is a different lane from a kitchen remodel, which prices whole-room scope -- cabinets, counters, appliances, and finishes together, with no faucet line isolated -- and from the pot-filler cluster, which prices a wall-mounted filler fixture over the stove, on its own water line, not a sink faucet at all. Neither neighbour prices a sink-faucet type, a like-for-like swap, or the valve and filtration layer -- this cluster does, and it prices no room and no stove fixture in return.
- Faucet type and finish named on every quote
- Unit price shown apart from fitting labour
- Swap scope stated: same holes, or new work priced apart
- Old-unit removal shown as carried or not carried
- Add-on lines shown apart from the base project
Frequently asked questions
How much does kitchen faucet installation cost in 2026?
Published 2026 figures put the install total at $91-$600 with an average of about $262 across 1,438 verified projects in Angi reporting. Professional installation alone runs $162-$364, and HomeGuide puts installation including removal at $120-$300.
How does the faucet type change the price?
Published type bands put single-handle units at $150-$350, pull-down and pull-out units at $175-$500, and bridge and touchless units at $400-$700. Smart units sit at $300-$400 in the Angi summary band, and units overall span $70-$900.
What does the labour line run on a faucet swap?
Published labour figures run $45-$150 per hour, with kitchen replacement labour at $120-$250 as a project line and the fitted scope reported at one to two hours for a like-for-like swap on existing connections.
What does a faucet unit cost on its own?
Unit prices average $100-$350 in HomeGuide reporting and span $70-$900 across types and finishes in Angi reporting. Finish moves the price inside each type band, apart from the labour line.
Is a kitchen faucet the same purchase as a kitchen remodel?
No. This guide prices one sink fixture and its fitting. A kitchen remodel prices whole-room scope on its own guide, and the pot-filler cluster prices a stove fixture on its own water line -- neither neighbour prices a single sink faucet.