Home Elevator Cost by Type Guide
The drive-type layer prints by system: Frame A prices a hydraulic elevator at $25,000 to $50,000 and a pneumatic at $35,000 to $60,000, while Frame B prices the same systems on two-story installed lines. This guide prices that layer apart.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The drive-type layer, priced apart in both frames
| Frame | Drive-type line | 2026 band |
|---|---|---|
| Frame A (professional-install, by type) | shaftless | $15,000-$25,000 |
| Frame A (professional-install, by type) | hydraulic | $25,000-$50,000 |
| Frame B (two-story installed) | winding-drum / cable-driven | $28,000-$50,000 |
| Frame B (two-story installed) | gearless traction | $50,000-$75,000 |
Every figure here sits inside its own frame, never averaged. Frame A prices the drive-type layer as a by-type table; Frame B prices the same layer as two-story installed lines named by drive system. The project whole prices on the home elevator hub; the project-form layer on the shaftless vs. traditional guide.
By-type totals, as published in Frame A
| Elevator type, as published | Frame A band |
|---|---|
| Shaftless elevator | $15,000-$25,000 |
| Cable-driven elevator | $15,000-$35,000 |
| Hydraulic elevator | $25,000-$50,000 |
| Pneumatic vacuum elevator | $35,000-$60,000 |
| Geared traction elevator | $25,000-$38,000 |
| Gearless traction elevator | $29,000-$55,000 |
| Vertical platform lift, named as a lift | $5,000-$20,000 |
The vertical platform lift prints inside the Frame A table as a lift, priced apart from every cab elevator line above it: it is a platform project in that frame, not a cab type. Angi shaftless data prints apart inside the same frame, at $18,500 to $27,500 with an average of about $22,000 installed, beside the $15,000 to $25,000 by-type shaftless line as published.
Drive-system lines, as published in Frame B
| Drive system, as published | Frame B band |
|---|---|
| Hydraulic | $30,000-$60,000 |
| Winding drum / cable-driven | $28,000-$50,000 |
| Geared traction | $30,000-$60,000 |
| Gearless traction | $50,000-$75,000 |
| Pneumatic vacuum | $35,000-$100,000 |
The same drive names print at different bands in the two frames, and both readings stand: a hydraulic line reads $25,000 to $50,000 in Frame A and $30,000 to $60,000 in Frame B, side by side and never merged. Frame B also prints a glass elevator line at $50,000 to $100,000+ in its by-type table, apart from its drive-system lines.
Pneumatic by-model lines, as published in Frame B
| Model, as published | Diameter / capacity, as published | 2026 band |
|---|---|---|
| PVE30 (single passenger) | 30 in. / 350 lb. | $35,000-$50,000+ |
| PVE37 (two passengers) | 37 in. / 450 lb. | $50,000-$75,000+ |
| PVE52 (largest model) | 52 in. / 525 lb. | $75,000-$100,000+ |
The diameter and capacity figures on these lines print as published attributes beside the model price lines only, exactly as the source table prints them. The model layer sits inside the Frame B pneumatic band of $35,000 to $100,000, read model by model and never blended with the Frame A pneumatic line.
Reading a by-type quote, as reported lines only
A by-type quote should name its type, its drive system, and its frame on every line: a by-type total read in Frame A, or a two-story installed line read in Frame B, with the platform lift read apart as a lift.
- Drive system named beside every band
- Frame named on every line: by-type or two-story installed
- Platform lift shown apart from cab elevator lines
- Model lines read inside their own frame band only
Frequently asked questions
How much does a home elevator cost by type, as published?
Frame A prices shaftless at $15,000 to $25,000, cable-driven at $15,000 to $35,000, hydraulic at $25,000 to $50,000, pneumatic vacuum at $35,000 to $60,000, geared traction at $25,000 to $38,000, and gearless traction at $29,000 to $55,000. Frame B prices its drive lines apart, two-story installed.
What do the traction lines print at in each frame, as published?
Frame A prints geared traction at $25,000 to $38,000 and gearless traction at $29,000 to $55,000. Frame B prints geared traction at $30,000 to $60,000 and gearless traction at $50,000 to $75,000. The frames stay apart on every line.
What do the pneumatic model lines print at, as published?
Frame B prints the PVE30 at $35,000 to $50,000+, the PVE37 at $50,000 to $75,000+, and the PVE52 at $75,000 to $100,000+, inside its pneumatic band of $35,000 to $100,000. Diameter and capacity figures print as published attributes beside those price lines.
Is a vertical platform lift priced as a cab elevator, as published?
No. Frame A prints the vertical platform lift at $5,000 to $20,000 named as a lift, priced apart from its cab elevator types. It reads as a platform project line in that frame.
What does the glass line print at, as published?
Frame B prints a glass elevator at $50,000 to $100,000+ in its by-type table, apart from its drive-system lines. Frame A prints no glass line in the grounded data, and that absence prints here as published.