Driveway Channel Drain Cost Guide

The driveway layer prints apart by frame: Frame A prices runs by driveway width, from $400 to $1,200 for a one-car span, while Frame B prints one driveway average rate of $70 per linear foot.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data for Orange County — not a quote. Two published frames, Frame A (HomeGuide drainage-system data) and Frame B (Angi per-project frame), are named apart and never blended. Always get 3 written quotes.

Driveway runs and apron lines, priced apart in both frames

FrameLine, as published2026 band
Frame Adriveway trench or channel drain, average$400-$2,400
Frame Atrench or channel drain installation, per linear foot$30-$150
Frame Btrench or channel driveway drainage system, average per linear foot$70
Frame Bdrainage system installations, per system$2,111-$6,775

Every figure here is a published line inside its own frame and its own layer, never folded into the other. The project whole prices on the trench drain hub; the material layer on the grate and material guide.

The by-width layer, as reported

Driveway width line, as publishedSpan2026 band
1-car driveway run, in HomeGuide drainage-system data10-12 ft width$400-$1,200
2-car driveway run, in the same data20-24 ft width$800-$2,400
1-side driveway run, in the same data18-30 ft length$700-$3,000

By-width pricing prints on Frame A only, in three named runs: two across the width of the driveway, by car count, and one along one side, by length. The 1-side band reaches past the driveway average for the project as a whole, and stays on its own line: three runs, three readings, never one driveway price.

The garage-apron layer, as reported

Apron line, as publishedReading2026 band
Garage aprons named among printed placements for channel runsplacement, inside the per-foot band$30-$150 per linear foot
Garages named in Frame B's trench drain description, basement-drain dataper project$1,500-$4,000
Driveway average that the apron run reads against, Frame Aper driveway run$400-$2,400

The apron reading is a placement reading: the run at the garage apron is the same channel build priced everywhere else here, read at the span the apron already has. Neither frame prints an apron-only price here; the apron run reads against the by-width bands, the driveway average, and the per-foot lines.

Frame B driveway reading, as reported

Frame B line, as publishedReading2026 band
Trench or channel driveway drainage system, in HomeAdvisor (Angi) dataaverage, per linear foot$70
Trench drain, in Angi's trench-vs-French comparisonper linear foot$30-$150
Trench drain, channel-style, in Angi's basement-drain dataper project$1,500-$4,000

Frame B answers the driveway question with a rate, not a run band: one average per linear foot for a driveway drainage system, printed inside its wider drainage tables. Read beside Frame A, the two driveway readings are two pricings of the same run -- one by the width of the span, one by the foot -- and neither is converted into the other here.

Reading the driveway layer, by frame

Frame A answers with width bands: one-car, two-car, and one-side runs, each with its span printed beside its band. Frame B answers with an average rate and a per-project band. A driveway quote names its reading in its first line.

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data and industry sources. Your price will vary with channel length, grate and channel material, and the project reading. This guide does not endorse, rate, or recommend any brand, product, or contractor. Figures are informational ranges only, not quotes.

Frequently asked questions

How much does a driveway channel drain cost, as published?

Frame A prints a driveway trench or channel drain at $400 to $2,400 on average. By width: a 1-car run at $400 to $1,200, a 2-car run at $800 to $2,400, and a 1-side run at $700 to $3,000. Frame B prints an average rate of $70 per linear foot.

What does a two-car driveway run cost, as reported?

Frame A prints the 2-car run, spanning 20 to 24 feet of width, at $800 to $2,400. It is the widest of the two by-car-count bands and prints level with the top of the driveway average for the project as a whole.

Is a garage-apron run priced as its own line, as reported?

No. Neither frame prints an apron-only band in the lines carried here. Garage aprons print as a named placement for channel runs, and garages print inside Frame B's per-project trench drain description at $1,500 to $4,000; the apron run reads against the by-width and per-foot lines.

How does Frame B price the driveway layer, as reported?

By the foot and by the project, never by width: a trench or channel driveway drainage system at an average of $70 per linear foot in HomeAdvisor (Angi) data, a comparison rate at $30 to $150 per linear foot, and drainage system installations at $2,111 to $6,775.

Can a by-width band and the per-foot average be combined into one driveway price?

No. Frame A's by-width bands price whole runs by span; Frame B's $70 average prices by the foot. The frames and their readings are never blended, and neither reading is converted into the other.

Related guides